Welcome to the Team Deadly Sones car audio forum
 
HomeHome  FAQFAQ  SearchSearch  RegisterRegister  Log in  

Share | 
 

 SD16KD output at 2ohm

Go down 
AuthorMessage
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: SD16KD output at 2ohm   3/13/2011, 4:12 pm

Just wondering what this beast does at 2ohm. I have 3 g31's in the back running at 15.9 @ 200a. 100ft 1/0 to be run as well. My guess 6k daily. Let me know. I emailed murlio about it said I should be good with the electrical but he said nothing about the amps output.
Back to top Go down
Testtones

avatar

Posts : 140
Join date : 2011-01-10
Age : 42
Location : St Thomas

PostSubject: Re: SD16KD output at 2ohm   3/13/2011, 5:22 pm

the 16 k is rated at 12 800 RMS at 2 ohms 12.6 volts

_________________
[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this image.]
Back to top Go down
http://www.facebook.com/groups/144333958964582/#!/Testtones
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: SD16KD output at 2ohm   3/13/2011, 6:47 pm

I know mat got 9k+ at 2.x rise on a burp. I guess headroom is a great thing either way.
Back to top Go down
fox_racin4



Posts : 246
Join date : 2010-07-15
Age : 27
Location : Windsor

PostSubject: Re: SD16KD output at 2ohm   3/13/2011, 7:28 pm

gunna want more power to run that amp daily...
Back to top Go down
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: SD16KD output at 2ohm   3/13/2011, 7:38 pm

I'm not a balls to the wall kind of guy man. This thing will whale regardless. Just nice to have alot of headroom. The fact I own a giant amp for the future make menhaply too. What are you seeing from the 8k power wise?
Back to top Go down
Testtones

avatar

Posts : 140
Join date : 2011-01-10
Age : 42
Location : St Thomas

PostSubject: Re: SD16KD output at 2ohm   3/13/2011, 7:43 pm

I clamped 5800 @ 2.1 ohms with mine.

_________________
[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this image.]
Back to top Go down
http://www.facebook.com/groups/144333958964582/#!/Testtones
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: SD16KD output at 2ohm   3/13/2011, 7:59 pm

Nice. So I should see double on my next build. Nice.
Back to top Go down
Mat Romain



Posts : 82
Join date : 2010-07-14
Age : 31
Location : Durham Region, Ontario

PostSubject: Re: SD16KD output at 2ohm   3/14/2011, 8:03 am

2.1 ohms AFTER rise, i saw 9200 ish rms.

that was with 7 g31's and only 13.3v starting, ,y new found 15+ should make a good diffrence id think

for burps the amp was great, for daily it made alot of unwanted noise and heated coils very fast, just my experince tho, everyone but me loves them.
Back to top Go down
http://www.stillplayinlow.com
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: SD16KD output at 2ohm   3/14/2011, 9:19 am

15.9 is my saving grace i feel. I cannot fit anymore then 3 g31's back there unless I get fancy with the box. I'd like to get all 6 in there but I don't feel like it's going to happen.
Back to top Go down
Testtones

avatar

Posts : 140
Join date : 2011-01-10
Age : 42
Location : St Thomas

PostSubject: Re: SD16KD output at 2ohm   3/14/2011, 10:24 am

for daily 3 batteries will be tough with that amp. The SD amps are safe down to 8 volts so you will not hurt the amp from voltage drop, but you will not see the full potential of the amp. Remember too, the lower your voltage drops the more likely you will clip.

You might want to at least consider a 2nd alt if 3 batteries is you limit.

_________________
[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this image.]
Back to top Go down
http://www.facebook.com/groups/144333958964582/#!/Testtones
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: SD16KD output at 2ohm   3/14/2011, 10:49 am

It's a zx3 man. No room for shot. I like headroom. I don't like magic smoke though. I'm going to try to get all 6 batts in there.
Back to top Go down
Sponsored content




PostSubject: Re: SD16KD output at 2ohm   

Back to top Go down
 
SD16KD output at 2ohm
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Team Deadly Sones :: Product Support :: Testtones Audio-
Jump to: