Welcome to the Team Deadly Sones car audio forum
 
HomeHome  FAQFAQ  SearchSearch  RegisterRegister  Log in  

Share | 
 

 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)

Go down 
AuthorMessage
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/17/2010, 4:44 pm

Enclosure for Stacey's ZX3.

2.5 cubes @ 36hz for 2 - 10" JBL 1022's he bought off Ben (zeptoplix) through our forum. There has been some good deals available on here. Thanks to everyone.



I like this design, and think it will be quite effective. Twisted Evil

Build starts tomorrow.

_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!


Last edited by DeadlySones on 12/21/2010, 4:23 pm; edited 4 times in total
Back to top Go down
http://www.deadlysonesamprepair.com
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 2:08 pm

Got all the materials today. Went to home depot, and the guy (Trevor) in charge of cutting the wood was a good guy. Really went out of his way to ensure the cuts were perfect. This box is going to come together nicely. I just need to cut the 45's on my table saw.

The fun begins. Smile


_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!
Back to top Go down
http://www.deadlysonesamprepair.com
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 3:06 pm

Big thanks to Paul for this. I have no time for this n maybe I have found A builder for the shop.
Back to top Go down
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 4:25 pm

Just about done, just need to cut holes for the subs and make/install the 45's. NP Stacey, glad I could help. Smile







Flash made the paint look a lot lighter than it really is.










_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!


Last edited by DeadlySones on 12/19/2010, 8:47 pm; edited 5 times in total
Back to top Go down
http://www.deadlysonesamprepair.com
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 4:45 pm

A tip if I may. Rubberized undercoating for port painting work the best and covers amazingly.
Back to top Go down
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 6:34 pm

You said you just wanted it black man... I would have used whatever you wanted if you said so earlier... It is darker than it appears in the pic. I bit the cost of paint seeing as it was requested afterward. Plus the rubberized undercoating is a huge velocity drag when used in a port. Its not bad for an outside finish. It could have used another layer to make it brighter as it did suck it up a bit, but after 3 layers I used the whole can of paint. lol

_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!


Last edited by DeadlySones on 12/19/2010, 8:19 pm; edited 2 times in total
Back to top Go down
http://www.deadlysonesamprepair.com
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 7:40 pm

Not bitching just saying. Btw done yet. Hahaha
Back to top Go down
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 7:41 pm

Need to invest in a 3/4" round over bit.

Back to top Go down
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 7:42 pm

Just need to cut the holes and install the 45's. I can't find my router circle jig anywhere... I'll drop it by tomorrow.

_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!


Last edited by DeadlySones on 12/19/2010, 8:48 pm; edited 1 time in total
Back to top Go down
http://www.deadlysonesamprepair.com
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 7:46 pm

MikesCarToys wrote:
Need to invest in a 3/4" round over bit.

What you talkin about willis? I rounded all edges with 3/8 round over. The biggest I have is 1/2 round over bit. With 3/4" MFD the 3/8 bit works perfectly. 1/2" is for 1" MDF but if you would like I can go over yours with the 1/2"? Not a prob, lmk what you want... Smile

_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!
Back to top Go down
http://www.deadlysonesamprepair.com
MikesCarToys



Posts : 137
Join date : 2010-08-20

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 8:14 pm

I'm facing with you man. Looks great. Thanks again.
Back to top Go down
Dylan



Posts : 151
Join date : 2010-07-15

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 8:57 pm

ive noticed when painting a box it works alot better when you roll the paint on. goes on a bit thicker to and it doesent soak in nearly as much. and i agree 1/2 round over is the biggest i would go.
Back to top Go down
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 8:57 pm

Np, see ya tomorrow.

_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!
Back to top Go down
http://www.deadlysonesamprepair.com
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/19/2010, 9:00 pm

Dylan wrote:
ive noticed when painting a box it works alot better when you roll the paint on. goes on a bit thicker to and it doesent soak in nearly as much. and i agree 1/2 round over is the biggest i would go.

True & I have a paint gun (best finish), but seeing as he only requested the port be painted black and Jordan has my gun, I just bought a can of paint. If it were a completely finished, painted box, I would have bought the good stuff. He was trying to build this as cheap as possible... it's nothing more than a raw box, with painted port. As requested. The paint isn't what makes it sound good anyway.... Wink

I used a roller on one of my old enclosures and it turned out rather well. Home Depot even color matched my interior perfectly.


_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!
Back to top Go down
http://www.deadlysonesamprepair.com
DeadlySones
Admin
avatar

Posts : 679
Join date : 2010-07-09
Age : 41
Location : Windsor, Ontario

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   12/20/2010, 10:18 am

Unfortunately I couldn't find my router circle jig anywhere, but its ready for delivery. Smile




_________________
Paul Bennett
Owner/Operator @ Deadly Sones Amp Repair


Who needs to knock, when you have BASS!!
Back to top Go down
http://www.deadlysonesamprepair.com
$D.T.P-G.T.P$
Moderators
avatar

Posts : 118
Join date : 2010-09-09
Age : 32
Location : Windsor, Ontario (519)

PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   1/24/2011, 10:41 pm

LOOKS sick man!
Back to top Go down
http://www.anthony420.webs.com/
Sponsored content




PostSubject: Re: 2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)   

Back to top Go down
 
2-10" 2.5 cubes @ 36hz for Stacey (Mikescartoys)
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Team Deadly Sones :: Enclosure Section :: Design/Fabrication Pics-
Jump to: